Description:

Marchesini Sachet Filling Line comprises of:

2x Marchesini sachet fillers - Model MS235, Marchesini Cartoner Model - BA-50, Prisma Checkweigher, Labeler & Marchesini casepacker - Model - MC820

 

Marchesini Sachet Fillers 1997

For packaging powders in sachets, Marchesini Group presents the MS235, a heat-sealed sachet form/fill/seal machine. To guarantee a perfect dose in every sachet, each dosing screw feeder has been fitted with a motor-driven secondary pre-screw feeder device for perfect constant product feed in each dosing channel. This new system uses an independent brushless motor to drive the secondary screw feeder unit, and avoids having mixers around the dosing unit. The dosing system is set up to be equipped with a weight check system on each channel, with relative feed-back. Size change-overs are fast, not forgetting the possibility of automatically removing the dosing device at the end of production. A simple motor-powered control allows its outward rotation. Parts in contact with the product can be removed without tools. The basic ideas behind the design of this machine were easy cleaning, maximum efficiency, great reliability, extreme accessibility and flexibility.

 

Marchesini Cartoner BA-50 1995 

Marchesini horizontal cartoner, model BA50 built in 1995, painted steel construction, intermittent motion, setup for reverse tuck, infeed bottle feeding device, pre-folded carton storage up to 48in, carton automatic feeding system, products are placed automatically into cartons, adjustment for carton size, carton closing automatically with adjustable guides, electrical panel with PLC Omron type CQM1, lexan guarding with interlocks, 208V, 3ph, 60hz, . Overall dimensions 11ft long x 5ft wide x 5ft high.

Marchesini casepacker MC820 1996

The MC820 case packer is an automatic horizontal model with a sturdy, space-saving and ergonomic design. With its use of robotized technology, it can deliver exceptional speed and flexibility to ensure enhanced performance.

The case blank is inserted into the ergonomic magazine and post insertion, an arm with suction cups picks up the case blank and transfers it to the opening. It guarantees a precise squaring owing to the ability of the suction cups to hold the case blank from top to bottom. The products are grouped and vertically stacked; once inside the hopper, they are pushed into the case.

Mechanical Speed
•10 cases/Minute
•Pick & Place unit of casepacker up to 50 product picking cycles/minute
Product size:
•‘A’ from 20 to 260mm ;’B’ from 10 to 150mm;’H’ from 50 to 250mm

Collation:
•‘a1' 130 ÷ 510mm; ’b1' 110 ÷ 335mm ;’h1' 110 ÷ 335mm

External Case:
•‘A1’ length from 140 to 520mm; ’B1’ width from 120 to 350mm ;’H1’ height (depth) from 120 to 350mm
•Product infeed: 870 ± 50 mm ; Case Discharge: From 440 to 555mm